H006SELSCALE acid concrete cleaner and descaler H006

 Description   Removes cement and plaster splashes - ideal for initial cleaning. Cleans and etches concrete floors, ensures effective 'key' for seal application. Removes industrial grime and stains from brick and stone exterior. Descales and derusts metals prior to painting.

Application   For cleaning and descaling brick, stone and concrete, quarry tiles etc. and for metal desrusting. Directions Initial cleaning and concrete etching: Dilute SELSCALE 1 part to 4 parts water.Brush or spray. Allow to penetrate 5 to 10 minutes then rinse. For stubborn deposits use neat. Descaling metal: Dilute SELSCALE 1 part to 4 parts water. Brush on. Allow to descale, rinse, allow to dry. Paint or protect from corrosion immediately. N.B. 1. Do not use on or near linoleum floors, terrazzo, marble, acid sensitive stone, stainless steel, chrome or enamel. 2. Regular use on concrete will cause deterioration and is NOT recommended. 3. Descaled metal should be painted immediately to prevent rusting.

5 Liter container





SELATE Ammonia free metallized polish Stripper and heavy Duty Cleaner   F032

Description   No choking ammonia fumes. Quick removal of all emulsion and metallized polishes even those 'aged on'. Controlled foam for use with suction driers and combined machines. Modern chelating action unlocks metallized polishes.

 Application For the stripping of metallized and non-metallized polish from linoleum, rubber, sealed wood, terrazzo and thermoplastic floors. Effective heavy duty formulation for the removal of impacted dirt from concrete and non-porous surfaces.

Directions     Polish stripping - dilute Selate 1 part to 10 parts hot water. Allow to soak on floor for 10-15 minutes.Scrub thoroughly, preferably with a scrubbing machine fitted with a nylon scrubbing pad. Remove solution with a mop or suction drier. Rinse thoroughly and allow to dry before reapplying polish.

5 Liter container






TAR N'GLUE tar and glue remover F084

 Description   Removes tar and glue from all hard, solvent-resistant surfaces Safe to use on metals Ideal for the removal of most sealants, adhesives and stubborn areas of new car delivery wax. Silicone free and suitable for use in body shops

Application   Use to remove tar, glue and bitumen from floor surfaces ,wheel trims, chrome, engine bays and any metal surface.

Directions     Apply with a clean soft cotton cloth and rub until all residue is removed. Wipe all areas with a wet sponge. NOTE: Use only in well ventilated areas when working on interiors, have all doors open. Do not close doors until solvent odour has dispersed. N.B. Product can affect some sensitive surfaces - Always carry out a spot test on an obscure area before full application.

5 Liter container






RUST ‘N’ CHROME rust remover and chrome cleaner H007

 Description     Easy application - simple to use. Effective - acids dissolve away rust. Fast, penetrative action.

Application   For effective removal of rust off steel and chrome work. N.B. Acids can effect paintwork and plastic surfaces particularly nylon. If accidental contact does occur rinse off immediately with water.

Directions RUST 'N' CHROME is generally used undiluted. All loose rust must first be removed. Apply Rust 'n' Chrome using a brush, agitate if necessary and leave for up to 10 minutes. Rinse off with water and wipe dry. If any rust still remains repeat the process. For chrome applications treat as above then apply polish to confer lasting protection.

5 Liter container



Become our Customer





Copyright ©2014 | Powered by Oncyprus